mmap --- 内存映射文件支持

内存映射（mmap）文件对象的行为既像 bytearray 又像 文件对象。 你可以在大部分接受 bytearray 的地方使用 mmap 对象；例如，你可以使用 re 模块来搜索一个内存映射文件。 你也可以通过执行 obj[index] = 97 来修改单个字节，或者通过对切片赋值来修改一个子序列: obj[i1:i2] = b'...'。 你还可以在文件的当前位置开始读取和写入数据，并使用 seek() 前往另一个位置。

内存映射文件是由 mmap 构造函数创建的，其在 Unix和 Windows上是不同的。 无论哪种情况，你都必须为一个打开的文件提供文件描述符以进行更新。 如果你希望映射一个已有的 Python 文件对象，请使用该对象的 fileno() 方法来获取 fileno 参数的正确值。 否则，你可以使用 os.open() 函数来打开这个文件，这会直接返回一个文件描述符（结束时仍然需要关闭该文件）。

注解

如果要为可写的缓冲文件创建内存映射，则应当首先 flush() 该文件。 这确保了对缓冲区的本地修改在内存映射中可用。

对于 Unix 和 Windows版本的构造函数，可以将 access 指定为可选的关键字参数。 access 接受以下四个值之一： ACCESS_READ， ACCESS_WRITE 或 ACCESS_COPY 分别指定只读，直写或写时复制内存，或 ACCESS_DEFAULT 推迟到 prot 。 access 可以在 Unix 和 Windows 上使用。如果未指定 access，则 Windows mmap 返回直写映射。 这三种访问类型的初始内存值均取自指定的文件。 分配给 ACCESS_READ 内存映射会引发 TypeError 异常。分配给 ACCESS_WRITE 内存映射会影响内存和基础文件。 分配给 ACCESS_COPY 内存映射会影响内存，但不会更新基础文件。

在 3.7 版更改: 添加了 ACCESS_DEFAULT 常量。

要映射匿名内存，应将 -1 作为 fileno 和 length 一起传递。

class mmap.mmap(fileno, length, tagname=None, access=ACCESS_DEFAULT[, offset])

（ Windows 版本） 映射被文件句柄 fileno 指定的文件的 length 个字节，并创建一个 mmap 对象。如果 length 大于当前文件大小，则文件将扩展为包含 length 个字节。如果 length 为 0，则映射的最大长度为当前文件大小。如果文件为空， Windows 会引发异常（你无法在Windows上创建空映射）。

如果 tagname 被指定且不是 None ，则是为映射提供标签名称的字符串。 Windows 允许你对同一文件拥有许多不同的映射。如果指定现有标签的名称，则会打开该标签，否则将创建该名称的新标签。如果省略此参数或设置为 None ，则创建的映射不带名称。避免使用 tag 参数将有助于使代码在Unix和Windows之间可移植。

offset 可以被指定为非负整数偏移量。 mmap 引用将相对于从文件开头的偏移。 offset 默认为0。 offeset 必须是 ALLOCATIONGRANULARITY 的倍数。

class mmap.mmap(fileno, length, flags=MAP_SHARED, prot=PROT_WRITE|PROT_READ, access=ACCESS_DEFAULT[, offset])

(Unix 版本) 映射文件描述符 fileno 指定的文件的 length 个字节，并返回一个 mmap 对象。如果 length 为 0 ，则当调用 mmap 时，映射的最大长度将为文件的当前大小。

flags specifies the nature of the mapping. MAP_PRIVATE creates a private copy-on-write mapping, so changes to the contents of the mmap object will be private to this process, and MAP_SHARED creates a mapping that's shared with all other processes mapping the same areas of the file. The default value is MAP_SHARED.

prot, if specified, gives the desired memory protection; the two most useful values are PROT_READ and PROT_WRITE, to specify that the pages may be read or written. prot defaults to PROT_READ | PROT_WRITE.

access may be specified in lieu of flags and prot as an optional keyword parameter. It is an error to specify both flags, prot and access. See the description of access above for information on how to use this parameter.

offset may be specified as a non-negative integer offset. mmap references will be relative to the offset from the beginning of the file. offset defaults to 0. offset must be a multiple of ALLOCATIONGRANULARITY which is equal to PAGESIZE on Unix systems.

To ensure validity of the created memory mapping the file specified by the descriptor fileno is internally automatically synchronized with physical backing store on Mac OS X and OpenVMS.

This example shows a simple way of using mmap:

import mmap

# write a simple example file
with open("hello.txt", "wb") as f:
    f.write(b"Hello Python!\n")

with open("hello.txt", "r+b") as f:
    # memory-map the file, size 0 means whole file
    mm = mmap.mmap(f.fileno(), 0)
    # read content via standard file methods
    print(mm.readline())  # prints b"Hello Python!\n"
    # read content via slice notation
    print(mm[:5])  # prints b"Hello"
    # update content using slice notation;
    # note that new content must have same size
    mm[6:] = b" world!\n"
    # ... and read again using standard file methods
    mm.seek(0)
    print(mm.readline())  # prints b"Hello  world!\n"
    # close the map
    mm.close()

mmap can also be used as a context manager in a with statement:

import mmap

with mmap.mmap(-1, 13) as mm:
    mm.write(b"Hello world!")

3.2 新版功能: Context manager support.

The next example demonstrates how to create an anonymous map and exchange data between the parent and child processes:

import mmap
import os

mm = mmap.mmap(-1, 13)
mm.write(b"Hello world!")

pid = os.fork()

if pid == 0:  # In a child process
    mm.seek(0)
    print(mm.readline())

    mm.close()

Memory-mapped file objects support the following methods:

close()

Closes the mmap. Subsequent calls to other methods of the object will result in a ValueError exception being raised. This will not close the open file.

closed

True if the file is closed.

3.2 新版功能.

find(sub[, start[, end]])

Returns the lowest index in the object where the subsequence sub is found, such that sub is contained in the range [start, end]. Optional arguments start and end are interpreted as in slice notation. Returns -1 on failure.

在 3.5 版更改: 现在支持可写的 字节类对象。

flush([offset[, size]])

Flushes changes made to the in-memory copy of a file back to disk. Without use of this call there is no guarantee that changes are written back before the object is destroyed. If offset and size are specified, only changes to the given range of bytes will be flushed to disk; otherwise, the whole extent of the mapping is flushed. offset must be a multiple of the PAGESIZE or ALLOCATIONGRANULARITY.

(Windows version) A nonzero value returned indicates success; zero indicates failure.

(Unix 版本) 返回零值以表示成功。 当调用失败时将引发异常。

move(dest, src, count)

Copy the count bytes starting at offset src to the destination index dest. If the mmap was created with ACCESS_READ, then calls to move will raise a TypeError exception.

read([n])

Return a bytes containing up to n bytes starting from the current file position. If the argument is omitted, None or negative, return all bytes from the current file position to the end of the mapping. The file position is updated to point after the bytes that were returned.

在 3.3 版更改: Argument can be omitted or None.

read_byte()

Returns a byte at the current file position as an integer, and advances the file position by 1.

readline()

Returns a single line, starting at the current file position and up to the next newline.

resize(newsize)

Resizes the map and the underlying file, if any. If the mmap was created with ACCESS_READ or ACCESS_COPY, resizing the map will raise a TypeError exception.

rfind(sub[, start[, end]])

Returns the highest index in the object where the subsequence sub is found, such that sub is contained in the range [start, end]. Optional arguments start and end are interpreted as in slice notation. Returns -1 on failure.

在 3.5 版更改: 现在支持可写的 字节类对象。

seek(pos[, whence])

Set the file's current position. whence argument is optional and defaults to os.SEEK_SET or 0 (absolute file positioning); other values are os.SEEK_CUR or 1 (seek relative to the current position) and os.SEEK_END or 2 (seek relative to the file's end).

size()

Return the length of the file, which can be larger than the size of the memory-mapped area.

tell()

Returns the current position of the file pointer.

write(bytes)

Write the bytes in bytes into memory at the current position of the file pointer and return the number of bytes written (never less than len(bytes), since if the write fails, a ValueError will be raised). The file position is updated to point after the bytes that were written. If the mmap was created with ACCESS_READ, then writing to it will raise a TypeError exception.

在 3.5 版更改: 现在支持可写的 字节类对象。

在 3.6 版更改: The number of bytes written is now returned.

write_byte(byte)

Write the integer byte into memory at the current position of the file pointer; the file position is advanced by 1. If the mmap was created with ACCESS_READ, then writing to it will raise a TypeError exception.